Difference between revisions of "Q: We have just started configuring our system, and we are not seeing Careguides as available in the ACI. Were they delivered? Are they Turned on?"
Max.Stroud (talk | contribs) |
Max.Stroud (talk | contribs) |
||
| Line 1: | Line 1: | ||
Careguides have been delivered, but are not active. They should only be activated after you have completed your configuration including especially the synchronization of the Order Item Dictionary (OID) and mapping of the Order Concept Dictionary (OCD). If you activate careguides prior to completing the mapping & syncing process the order sets will not be associated with the careguide. | Careguides have been delivered, but are not active. They should only be activated after you have completed your configuration including especially the synchronization of the Order Item Dictionary (OID) and mapping of the Order Concept Dictionary (OCD). If you activate careguides prior to completing the mapping & syncing process the order sets will not be associated with the careguide. | ||
| + | |||
| + | We recommend completing your build work first, as outlined int he Build Workbook, and then reviewing, editing and activating careguides when you have entered the testing phase so that you can test their functionality. | ||
To see the Careguide Monographs and Order Sets, Navigate to the Phys Admin (Physician Admin) Workspace, Select "By Module" and "Base" on the Vertical Toolbar. On the Horizontal Toolbar, click Careguide Template Management. | To see the Careguide Monographs and Order Sets, Navigate to the Phys Admin (Physician Admin) Workspace, Select "By Module" and "Base" on the Vertical Toolbar. On the Horizontal Toolbar, click Careguide Template Management. | ||
Revision as of 14:16, 17 October 2008
Careguides have been delivered, but are not active. They should only be activated after you have completed your configuration including especially the synchronization of the Order Item Dictionary (OID) and mapping of the Order Concept Dictionary (OCD). If you activate careguides prior to completing the mapping & syncing process the order sets will not be associated with the careguide.
We recommend completing your build work first, as outlined int he Build Workbook, and then reviewing, editing and activating careguides when you have entered the testing phase so that you can test their functionality.
To see the Careguide Monographs and Order Sets, Navigate to the Phys Admin (Physician Admin) Workspace, Select "By Module" and "Base" on the Vertical Toolbar. On the Horizontal Toolbar, click Careguide Template Management.
This is where your physician champions can review the monographs & order sets that are associated with each careguide.
When your mapping/syncing process is complete, Follow the steps in KB Article #4366. This article will guide you through the following steps:
- Review the delivered careguides
- Save the Allscripts Careguide as an Enterprise level careguide
- Activate the Careguide Template
When you have followed these steps, the Careguide button in the ACI will activate when you select a Problem from the Problem list that has a careguide associated with it.
