SecureLink Tips

From Galen Healthcare Solutions - Allscripts TouchWorks EHR Wiki
Jump to: navigation, search

Enable Access

If access to the Gatekeeper is disabled, you will need to open SecureLink on the Gatekeeper server and enable it.

You may follow these steps:

  1. Open SecureLink: it is found under All Programs -> Enexity SecureLink -> SecureLink Gatekeeper.
  2. This will launch IE to the local management site for SecureLink. Something like: http://127.0.0.1:4680/
  3. You'll notice that Access is Disabled on the main screen:
    SecureLink - Main Page.jpg
  4. Click on the Access Disabled link.
  5. On the Connection Status Screen, select Enable Gatekeeper and click Save:
    SecureLink - Access Disabled.jpg
  6. You'll now see that Access is Enabled:
    SecureLink - Access Enabled.jpg

Set Up Notifications

Here is a quick overview on how to set up notifications. A notification is sent to clients when Allscripts connects to their servers, this is also true of Galen SecureLink.

The following needs to be done from each Gatekeeper server:

  1. Open SecureLink: it is found under All Programs -> Enexity SecureLink -> SecureLink Gatekeeper.
  2. This will launch IE to the local management site for SecureLink. Something like: http://127.0.0.1:4680/
  3. Click Settings - > Notification Settings
  4. Under Email Addresses, add whichever emails should be notified when people log in

Image1.jpg

You can also click on that Activity Report button above and see detail from previous connections:

Image2.jpg